Does a laundry circuit need to be GFCI?

Does a laundry circuit need to be GFCI?

The NEC doesn’t require GFCI protection for clothes washing machines specifically, but it does for “Laundry Areas.” If the answer is “yes”, then you have your answer- the clothes washing machine will be GFCI protected, because all 120-Volt receptacles are to be GFCI protected in laundry areas, per the 2017 NEC.

What section in the NEC cites the requirements for the location of washing machine receptacles?

The NEC requires receptacles to be mounted with the neutral slot on the left.

Does washing machine need to be on a dedicated circuit?

In the Laundry Room Your laundry room should have a dedicated circuit of at least 20 amps. If you have a gas dryer, both your washing machine and gas dryer may be plugged into the same outlet. If you have an electric dryer, it will need its own dedicated 20-amp, 220-volt circuit.

Do basement circuits have to be GFCI protected?

GFCI protection is required for 125-volt to 250-volt receptacles supplied by single-phase branch circuits rated 150 volts or less to the ground. GFCI receptacles are required in bathrooms, garages, crawl spaces, basements, laundry rooms and areas where a water source is present.

Is there a difference between GFI and GFCI?

Ground fault circuit interrupters (GFCI) and ground fault interrupters (GFI) are the exact same device under slightly different names. Though GFCI is more commonly used than GFI, the terms are interchangeable.

Can a washing machine share an outlet?

Standard household electric power in the United States is 110 to 120 volts, with a 60-cycle alternating current, and most household washers can be plugged into wall outlets supplying this current.

Which location is not required to be GFCI protected?

GFCI protection is not required for receptacles that are not readily accessible, such as a ceiling-mounted receptacle for a garage door opener. Nor are they required for a receptacle on a dedicated branch circuit located and identified for a cord-and-plug-connected appliance, such as a refrigerator or freezer.

Should outlets be installed ground up?

The electrical code allows outlets to be installed with the ground plug hole facing up, down or sideways. It’s up to you, there is no standard electric outlet orientation.

What appliances need a dedicated circuit?

Appliances that need a dedicated circuit include:

• Electric ranges.
• Wall ovens.
• Refrigerators.
• Large Microwaves.
• Freezers.
• Dishwashers.
• Garbage disposals.
• Toaster ovens.

How many outlets can a GFCI protect?

There’s no limit. A standard GFCI will protect up to 20 amps, drawn from any combination of receptacles, either the built-in one or any number of additional ones connected to its load terminals.

Do you need a dedicated circuit for a washer and dryer?

While a dedicated circuit supplies only one appliance, a designated circuit is intended for single-use, not necessarily a single appliance. The “use” in this case is laundry, and you can plug both a washer and a gas dryer into the same receptacle.

What kind of circuit protection do you need for a gas dryer?

The NEC requires GFCI (ground-fault circuit interrupter) protection for all standard receptacles serving laundry areas. This includes the 20-amp designated receptacle for the washer (and gas dryer, as applicable) and any general-use receptacles.

Can you plug a gas dryer into a laundry circuit?

While a dedicated circuit supplies only one appliance, a designated circuit is intended for single use, not necessarily a single appliance. The “use” in this case is laundry, and you can plug both a washer and a gas dryer into the same receptacle.

What kind of circuit do you need for a laundry room?

Lighting Circuit. A laundry room would be pretty hard to use without a circuit for lighting. As mentioned, light fixtures in laundry rooms are likely to be on the same circuit as the lighting for an adjacent room or hallway. Standard lighting circuits are 15-amp circuits and often include general-use receptacles as well.