Admin Table of Contents
- 1 How do I fix Accu-Chek errors?
- 2 How do I reset my Accu-Chek?
- 3 How do I fix e1 error on Accu-Chek Active?
- 4 What is error E 1 on Accu-Chek Active?
- 5 What is error 9 on Accu-Chek?
- 6 How do you fix an E 1 error on Accu-Chek?
- 7 What does hi mean on Aviva blood glucose meter?
- 8 What does E-6 mean on Accu-Chek test strip?
How do I fix Accu-Chek errors?
E – 1 Test strip is damaged Replace the strip with a new one. E – 2 Incorrect code chip Turn off the meter and insert the correct chip. E – 3 Test error Discard the test strip and repeat the test. control) Discard the test strip and repeat the test.
How do I reset my Accu-Chek?
Perform a meter reset by doing the following:
- Remove the batteries.
- Press and hold the Power/Set/OK button for at least 2 seconds.
- Reinsert the batteries.
How do I fix e1 error on Accu-Chek Active?
“E-1” in the display means the test strip may be damaged or the code key is incorrect. Remove and reinsert the test strip. If the message reappears, turn off the meter and make sure the code key is properly inserted. If the message reappears, please contact Accu-Chek Customer Care.
What is Error 11 in Accu-Chek?
The test strip may be damaged, not properly inserted, or was previously used. Remove and reinsert the test strip, or replace it if damaged or previously used. : Remove and reinsert the test strip, or replace it if damaged or previously used. (The error code and Err will alternate on the display.)
Why does my Accu-Chek keep saying error?
Err with “code exp” on display “Err” in the display with the words “code exp” means the code key is incorrect or your test strips have expired. Make sure the code key is properly inserted and check the date on your test strips. If this doesn’t fix the problem, please contact Accu-Chek Customer Care.
What is error E 1 on Accu-Chek Active?
What is error 9 on Accu-Chek?
“E-9” in the display means the battery is almost out of power. Change the battery now. If the message reappears after the battery has been replaced, reset the meter. To reset the meter, remove the battery, press any meter button, then reinsert the battery.
How do you fix an E 1 error on Accu-Chek?
What does an E-1 mean on Accu-Chek Aviva?
An E-1 error, accompanied by an image of a test strip, indicates that the test strip is damaged or the code key is incorrect. An E-2 error indicates an incorrect code key. Errors designated E-3 suggest unusually high blood glucose levels or a testing strip error.
What does the error E-1 on Accu-Chek meter mean?
What does the error E-1 mean? “E-1” in the display means the test strip may be damaged or the code key is incorrect. Remove and reinsert the test strip. If the message reappears, turn off the meter and make sure the code key is properly inserted. If the message reappears, please contact Accu-Chek Customer Care.
What does hi mean on Aviva blood glucose meter?
If you see a blood drop and test drop on the screen, it means that the meter is ready for a drop of blood or control solution. If you see the letters HI displayed on the screen, your blood glucose may be higher than the measuring range of the system. Refer to Chapter 4, “Unusual Blood Glucose Results”, in your owner’s booklet.
What does E-6 mean on Accu-Chek test strip?
“E-6” in the display means blood or control solution was applied to the test strip before the flashing blood drop symbol appeared on the display. Discard the test strip and repeat the test.