How do I know what rear end is in my f150?

How do I know what rear end is in my f150?

Open the front door on the driver’s side. Locate the Truck Safety Compliance Certification Label on the door pillar near the door latch. Locate the two-digit code in the box labeled “AXLE,” which is just below the bar code. Match the code on the label to the corresponding rear axle ratio.

How do I identify my Ford rear end?

How to Identify Ford Rear Ends

1. Locate the axle ID tag on the rear-end housing—usually a sheet-metal tag bolted to the housing, although some vehicles had a paper tag, which may be missing.
2. Decode the service number by matching it to an axle service code chart, similar to those found on WoodyG.com and Drivetrain.

How do I find out what rear end is in my truck?

To figure out exactly what axle you have, you can look for the Dana stamped bill of materials number. This stamped number can usually be found on the righthand side or on the longer axletube on the same side of the tube as the differential cover, facing the rear of the truck.

How do I identify my differential?

Without an ID tag, differentials are identified by the number of cover bolts, the distinctive shape of the cover, the number of ring gear bolts, and ring gear diameter. They can also be identified by whether the center section is an integral or dropout design.

Can you tell the gear ratio by the VIN number?

While it may be possible to derive information about an auto’s gearbox ratio from its VIN, that depends largely on the information the manufacturer includes in the vehicle descriptor section (VDS) of the VIN.

How do I identify my GM front differential?

Information about Differentials in GM vehicles can usually be obtained by looking at the RPO or “Regular Production Option” codes contained in the Service Parts Identification tag in the glovebox. Whenever possible, reference the tag numbers when ordering parts for your Differential.

How do you find the gear ratio on a truck?

The gear ratio is usually listed in the VIN code located on driver’s door, the glove box, or the ID plate on the dashboard. Count the times a rear wheel goes around for one driveshaft turn: if its 3 1/2 it’s a 3.50:1. Divide the number of teeth on the ring gear by the number of teeth on the pinion gear.

How to identify a Ford F150 rear end?

Or accurately pinning down that Ford F150 rear end identification. The point isn’t what vehicle you have here, but making sure you’re IDing it correctly. Here, we help you identify what type of differential you have to ensure your project stays on track and you get the parts you need.

How to know the year, engine, rear end, transmission of an F150?

After seeing a candy apple red F150 that is in your price range and meets all of the specifications you are looking for how sure can you be on what the sellers says the engine size, rear end, and transmission is in this particular model? How do you know the year, engine, engine size, rear end, and transmission of an F150?

What are the numbers on a 1978 Ford truck?

From 1978, it changed to two letters followed by four numbers (e.g. XX0,000). The actual wheelbase in inches is shown on the rating or warranty plate. The code under “Color” indicates the exterior paint of the vehicle.

How to know what size engine is in my F150?

How to know what size engine is in my F150? Your F150 has several codes stamped at various locations on the truck that contain a lot of relevant information pertaining to a F150’s engine, make and model. The vehicle identification number (VIN) is one of these.