How do I know which Mantis tiller I have?

How do I know which Mantis tiller I have?

The model number on a Mantis tiller can be found on a white label, located on top of the engine housing. The model number will be located at the bottom of the label in the “Item#” field. Enter the model number of your Mantis below to search for parts.

Why did Husqvarna discontinue tillers?

Husqvarna is issuing a recall for several models of its rear tine tillers. The decision comes after the discovery that the tiller’s transmission shift rod and clip can come into contact with the control cable during shifting and cause the tiller to unintentionally move forward or backward.

Where is serial number on Mantis Tiller?

Mantis 2-Cycle Tillers The model and serial number on a Mantis 2-Cycle Tiller is located on a black and silver plate between the gas tank and the carburetor on the engine housing. It contains the letters “SV,” a number and another letter (ex. SV4A) .

Where is the model number on a Poulan Pro Tiller?

Poulan model numbers are found on the data plate or data label on the machine. This is usually located on the back or bottom of the unit.

What engine is on a Mantis Tiller?

The Mantis Gas-Only 4-Cycle Tiller weighs just 24 pounds. It starts easily, runs quiet and requires no gas/oil mixture in the tank….Specifications.

Engine 4-cycle Honda (no gas/oil mix required) 25cc
Tilling width 9″
Tilling depth 10″ or reverse tines to shallow cultivate 2″ to 3″
Weight 24 pounds

Did Husqvarna discontinue tillers?

Laceration hazard forces recall of tillers under numerous brand names, including Husqvarna, Jonsered, Poulan Pro and Ariens. Husqvarna Consumer Outdoor Products N.A. Inc., of Charlotte, NC, has recalled roughly 24,000 tillers.

Who makes Husqvarna tiller engines?

Husqvarna manufactures a variety of tillers or cultivators, including several rear-tine models. While the tiller itself is made by Husqvarna, the engine is not. The engines used in Husqvarna rear-tine tillers are made by either Briggs & Stratton or Honda, depending on the model.

How do you check a Mantis Tiller ignition coil?

Slide the boot on the plug, hold it against the block and pull it like you mean it. You should have a fat blue spark. If it’s dull yellow after all that it’s new coil time.

Did Husqvarna stop making tillers?

Where is model number on MTD Tiller?

The Model number is eleven characters long and is printed on the left side of the Product Identification Label. Characters can include numbers, letters or hyphens.

Is Mantis a good tiller?

It is powerful and does a quick job of tilling up the top 6 inches of soil. It works great but you have to get used to pulling it backwards. The tines will clog with debris often but it is not very difficult to pull the cotter pins, pull off a tine, clean it, and put it back on. I would recommend this to a friend.