Table of Contents
How do I reset my Mercedes radio?
How do I reset my Mercedes sound system?
- Locate the fuse box on the side of the dash on driver’s side.
- Remove the fuse box cover.
- Locate fuse 26 and 28. Remove both fuses.
- Locate the fuse box on the rear.
- Remove the key from the ignition and let the car stay off for at least 15 min.
How do you remove a 190e radio?
remove the two screws that you see at the bottom. pull outthe assembly that housed the ashtray. reach under theleft hand side under the radio, there is a clip that retains the radio in, push it down. pull the radio out – I think I pulled from the back.
Where can I find my Mercedes radio code?
To obtain your radio code you can:
- Visit your local authorized Mercedes-Benz dealer.
- Contact our Customer Assistance Center with your Vehicle Identification Number (VIN),
- Via phone: at 1-800-FOR-MERCEDES (1-800-367-6372)
How do I fix my Mercedes radio?
How to do a soft reset of the COMAND / NAV Radio System
- Locate the fuse box on the side of the dash on driver’s side.
- Remove the fuse box cover.
- Locate fuse 26 and 28. Remove both fuses.
- Locate the fuse box on the rear.
- Remove the key from the ignition and let the car stay off for at least 15 min.
How do you remove the radio from a Mercedes Sprinter?
Locate the four screws holding the stereo to the dashboard, the two at the top of the stereo, and the two in the lower corners. Hold the deck by the sides and lift it out of the dashboard. Reach around to the backside of the stereo and unplug the connections using your hands.
Why did my radio stop working?
Blown Fuse: One of the most common reasons for a car radio to stop working is a blown fuse. Damaged Antenna or Tuner: If the car’s CD player still works, but the radio itself doesn’t, then the problem most likely lies with either the antenna or the tuner.
How do I reset my car radio without the code?
Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio. Press and hold down the audio power button together with the SEEK button for about 50-60 minutes. Then, it will turn on without entering the radio code.
How can I bypass radio code?
Can I get radio code from VIN number?
The code is located on a card that comes with the original purchase of the vehicle, which we don’t have. A person can call the dealership with the serial number of the radio and Vehicle Identification Number (VIN) of the vehicle and ask for the radio code.
How do you remove the radio from a Mercedes Benz?
To remove the radio, you will need the radio removal shown below. We found these Mercedes-Benz radio removal tools on Amazon for under $10 and free shipping. Once you remove your radio or Comand look on the side or back of the radio for the serial code. Call back your dealer and give them the serial code.
Is it hard to remove a radio wire?
Well it is not that hard if you have right tools. There are many radios which you can remove by just a metal wire, but if you have mine type, you can just use two thin steel knifes, and if with them it is not enough you will have to use pliers as well.
How do you get the serial number on a Mercedes Benz radio?
Once you remove your radio or Comand look on the side or back of the radio for the serial code. Call back your dealer and give them the serial code. The code you get from using the serial number should definitively work. If you can’t reach a dealer you can try sending Mercedes-Benz cusomer service an email using this contact form.