Admin How do I turn off the 4 wheel drive indicator light?
The 4WD lock indicator light is turned off by pushing the switch again. NOTE: Do not use 4WD on normal dry pavement conditions.
What does it mean when the 4×4 Low light comes on?
The 4×4 Low Light indicates when the four-wheel drive system is enabled. The driver is responsible for turning this feature on and off. The 4×4 Low Light will come on for a moment when the 4×4 Low system is enabled. If the light does not come on or it stays on, have the system serviced as soon as possible.
What does the all wheel drive warning light mean?
The all-wheel drive (AWD) Warning Light is located on the instrument panel. When this light illuminates, the vehicle has detected a problem with the AWD system, or the diameter of the front and rear wheels is different.
What causes 4×4 not to engage?
The flashing light on the dash indicates the 4WD system has not engaged properly and that you have a technical fault somewhere. This could be in the form of any of the following: An electrical fault such as a corroded wire or faulty 4WD dial/switch, A component failure such as a faulty transfer case module or actuator.
Why does the 4 wheel drive light come on?
Vehicles that have four wheel drive systems tend to have a separate light to indicate an issue with the system. Usually labeled “Service 4WD”, when this light comes on, a code will be stored in the computer’s memory to help identify any issues. Depending on the problem, the four wheel drive may be disabled temporarily.
When does the traction control light come on?
If the traction control light does come on, it will usually do so while you’re accelerating. Do not panic when this happens because you need to focus on stabilizing the steering wheel as best as possible.
What does the blinking 4 wheel drive indicator mean?
So what is that 4 wheel drive indicator blinking on your dashboard means? The purpose of the 4 wheel drive light is to indicate when you have engaged 4WD mode by selecting 4H. When the light flashes continuously for more than 30 seconds it signifies there is a problem somewhere on your drivetrain system and that 4WD has not engaged properly.
When does the selected position indicator light stop flashing?
The selected position indicator light will flash until the transfer case completes the shift. When the shift is complete, the indicator light for the selected position will stop flashing and remain ON. If any of the shift conditions are not met, the indicator position light will continue to flash.