How do you drain the radiator fluid on a Dodge Ram 1500?

How do you drain the radiator fluid on a Dodge Ram 1500?

Locate the radiator’s drain valve on the bottom of the radiator. You don’t need to raise the Dodge Ram since it’s a high truck with enough room for this job. Place a tray underneath the drain plug. Then, using your wrench, loosen the drain valve.

Where is the radiator drain plug?

Hello, the radiator drain plug will be a the bottom edge of the radiator, facing the engine (passenger side). If you drain the coolant, be sure to catch it with a pan of some sort, and properly dispose of it. It will poison animals, and contaminate ground water.

How do you drain the radiator on a 2001 Dodge Ram 1500?

Gently touch the bottom of the radiator to make sure that it is cooled off. Loosen the drain plug by turning it counterclockwise with a metric socket and a breaker bar. Once the drain plug is loose, remove the breaker bar and socket. Allow the coolant to drain out of the radiator.

How do you drain the coolant reservoir on a Dodge Ram?

Place a five-gallon drain pan directly underneath the radiator drain valve on the bottom of the radiator. The drain valve is on the driver’s side. Use an adjustable wrench to loosen the drain valve. Allow all of the coolant to drain from the radiator.

When should I change the transmission fluid in my Ram 1500?

60,000 Miles- If you tow a lot with your Ram 1500, this is the interval which you’ll want to have your automatic transmission fluid replaced, as well as the fluid filter.

How much coolant does my 5.7 Hemi take?

Hemi User. 16.2 quarts is the capacity. So 2 gallons of antifreeze would be right.

Where is the radiator drain petcock?

You can locate it underneath the radiator of your car if you lift the front of your car with a jack. The petcock is a small bolt right under the radiator and easy to spot as modern radiators do not have any other holes underneath them that would require bolts.

Can a radiator drain plug leak?

A car radiator leaks because either the radiator hose is punctured or the radiator drain plug O-ring is damaged. Eighty percent of radiator leaks due to damaged radiator drain plug O-rings. This means that whenever you have a radiator leak, the radiator drain plug O-ring is the first thing you can check.

What is radiator flush?

A coolant flush resolves this problem – it’s basically a blood transfusion for your cooling system. A flush involves forcing several gallons of cleaner, water and new antifreeze through the system to get rid of all the old antifreeze and the contaminants that may have built up in it.

What kind of coolant does a Dodge Ram take?

1. ACDelco DEX-Cool Coolant Antifreeze – 12346290. And finally, we have the ACDelco DEX-Cool Coolant Antifreeze – 12346290 for the Dodge Ram 1500 Pickup. This is an OEM compatible coolant manufactured by ACDelco which is suitable for engines from various different manufacturers, the Ram 1500 included.

Do Dodge Ram 1500 have transmission problems?

01. Do Dodge Ram 1500 have transmission problems? Yes, Dodge Ram 1500 trucks experience transmission problems from time to time. Depending on how demanding the issue is, things could get pretty messy.

How do you flush a Dodge Ram radiator?

Place a tray underneath the drain plug. Then, using your wrench, loosen the drain valve. Let it drain until it’s empty. After you dispose the old coolant, close the drain plug and fill the radiator with distilled water.

How big is the drain plug on a Dodge radiator?

You can put a small piece of tubing on the niple of the drain valve and drain your coolant into a bucket, otherwise it will splatter right on top of the frame and go everywhere. I think its a 1/4 inch niple or maybe 5/16, I forget. I’m glad I could finally help someone.

Where is the radiator located on a Dodge Ram?

It’s located in the front of the car on top of the radiator. Before removing the radiator cap, be sure to put your hand on top of the engine to check if it is hot. If you can’t touch the engine, the coolant inside the engine is too hot and will burn you.

How do you open a drain plug on a Dodge truck?

You have to turn the plug 1/4 turn counter clockwise. Then you pull out on the plug and continue to turn it another 1/4 turn. You can actually do this in one motion by pulling out and turning at the same time. That will fully open the valve. At least that’s how you do it on mine.