How do you unlock Fisher Paykel dish drawer?

How do you unlock Fisher Paykel dish drawer?

Press and hold the LOCK button for 3 seconds to lock or unlock the control panel.

Why does my Fisher and Paykel washing machine keep beeping?

If your machine is beeping every 5 seconds and the high water light is lit, it means the water level in the machine is too high for the drum to spin. You can remove clothes from the machine to clear this problem. This warning light can also indicate that you need to select a higher water level to complete the wash.

Is it OK to extend washing machine drain hose?

If a remodeling project forces you to move the washing machine too far from the drain and the water supply for the hoses to reach, you don’t have to relocate the plumbing. Lengthening the drain hose isn’t difficult, because you can buy a drain hose extension that simply clamps onto the end of your existing hose.

How long can you extend dishwasher drain hose?

A. Mike Casey, a licensed plumbing contractor and co-author of Code Check Plumbing, responds: Most dishwashers come from the factory with a 6-foot 6-inch drain hose, and nearly all manufacturers allow this hose to be extended to a maximum total length of between 10 and 12 feet.

What kind of drain hose does Fisher Paykel use?

Fisher & Paykel complete Drain Hose and harness Assembly for GWL11US, IWL12US and IWL15 US. WILL NOT FIT GWL15 or any model not listed here. This kit includes the complete drain hose, lower wiring harness and water pressure sensor tube.

How to unclog a Fisher and Paykel DishDrawer drain?

Flush out all of the debris with very hot water from the sink, then replace the drain hose, tightening it well at both connection points. Look up the pump assembly in the manual. Different pump assemblies need to be removed in different ways, so you should remove yours via the exact method described in the manual for your model.

Can you replace the hot water inlet valve on a Fisher Paykel washer?

The drain hose by itself is not sold as a separate part. You must purchase this kit to replace your drain hose. Hot Water Inlet valve for Fisher & Paykel GWL10 US Washers.

Can a Fisher Paykel washer fit a gwl11?

WILL NOT FIT GWL11 and UP! It is always a good idea to replace BOTH valves as a set. If one is clogged, chances are the other will have issues. Fisher & Paykel drain hose and harness assembly for GWL10 series washers. Includes drain hose and wire harness as supplied by the factory.