Admin Table of Contents
How do I reset my Samsonite luggage lock if I forgot the combination?
To reset the Samsonite luggage lock, you need to do the following steps:
- Set the dial to 000.
- Turn the shackle at a 90-degree angle from the lock position.
- Push the shackle down (outside of the lock).
- Set the desired code.
- Pull the shackle up.
- Turn it back to the lock position.
How do you open a Samsonite lock without the code?
Travel Tips Video
- Rotate the left wheel until you see a notch in the wheel line up with the mark on the outside of the lock.
- Turn the second and third wheels in the same manner until the notches line up with the mark on the lock.
- Slide the latch button outward to release the clasp.
Can you reset a luggage lock combination?
Often, the lock will have a little reset button on the bottom or side of the lock. You may need a paperclip, pen, or pencil to push the button in and begin the resetting process. Put in your new combination. While pressing the reset button, enter your new combination in the lock.
How do you reset a combination lock without the code?
Pull up gently on the shackle and hold it in place. Turn the dial clockwise listening carefully until you hear the lock click. Start with a good deal of pressure and gently let up as you spin it around, until you meet resistance in only one place. If the dial catches every few numbers, you are pulling too hard.
How do you unlock a combination lock without the code?
How do you unlock a 3 digit Master combination lock?
Roll the middle dial until the appropriate number lines up with the number to its left. Do the same for the right-most number. Your three-digit combination should now show, left to right, lined up with the scored hash marks. Pull the body of the lock away from the U-shaped metal ring without turning any of the dials.
How do you reset the lock on Samsonite luggage?
To reset the combination lock on Samsonite luggage, turn the numbers on the lock to the previous code or to “0-0-0,” which is the default combination. Press and hold the reset button on the side of the lock. While holding the reset button in, turn the numbers to the desired combination. Release the reset button once the desired combination is set.
What’s the default number on a Samsonite lock?
When purchased, the locks are set on a factory default combination that you can change as often as you wish. Turn the number dials to the previously set combination, or to “0-0-0”, the factory default combination for Samsonite luggage.
How to reset number on American Tourister Luggage?
Rotate the three wheels on the lock to the current combination and open the luggage. Dial the three wheels to 0-0-0, which is the default combination setting for American Tourister and Samsonite luggage. Press and hold the reset button on the side of the lock inside your luggage.
How to unlock your suitcase when you’ve forgotten the suitcase?
Select the video camera and shine the flash down into the lock then zoom-in to see the disks more clearly. Starting with the first thumb-wheel of the lock, turn the wheel one click at a time until you see a notch in the disk as shown in the photos.