Admin Table of Contents
How many km is a Litre of diesel?
These vehicles use an average of 18 to 28 litres of diesel per 100 kilometers. Pick-up vans use the least amount of diesel per kilometer. 2-wheel drive pick-up vans typically use between 10 to 13 litres per 100 kilometers. And 4-Wheel drive pick-up vans use around 13 to 16 litres of diesel per 100 kilometers.
How much fuel does a car use per 100km?
The average vehicle had an average fuel consumption of 27.8 litres per 100 kilometres in 2020.
How do I calculate fuel consumption per 100km?
The calculation is: litres / distance * 100 = l/100km. For example: 57 litres / 635 km * 100 = 8.98l/100km. If you know the price of fuel, then you can simply multiply the price per litre by the result and that gives you your cost per 100km.
How do you calculate diesel?
Simple Method
- Formula To Estimate Maximum Engine Fuel Consumption. Gallon Per Hour (GPH) = (specific fuel consumption x HP)/Fuel Specific Weight.
- 300-hp Diesel Engine Example. GPH = (0.4 x 300)/ 7.2 = 105/7.2 = 16.6 GPH.
- 300-hp Gasoline Engine Example. GPH = (0.50 x 300)/ 6.1 = 150/6.1 = 24.5 GPH.
- Other Related Resources:
How far can a tractor go on 1 litre of diesel?
It can go about 700 km.
Is 20l per 100km good?
In general, 5 to 8 litres per 100 km would be considered a good fuel efficiency, 8 to 12 litres per 100 km would be average, and more than 12 litres per 100 km would be considered a relatively low fuel efficiency. Your driving habits also impact how efficiently your vehicle will use its fuel.
Is 10 Litres per 100km good?
In general, 5 to 8 litres per 100 km would be considered a good fuel efficiency, 8 to 12 litres per 100 km would be average, and more than 12 litres per 100 km would be considered a relatively low fuel efficiency.
What’s the cost of diesel?
Sydney’s current average diesel price is 139.2 cents per litre – down 3.5 cents per litre this past week. The current average LPG price in Sydney is 84.9 cents per litre – down 0.2 cents per litre this past week.
How do you calculate diesel per hour?
How do you calculate fuel per hour?
For example, if you traveled 200 miles and it took you 4 hours, then 200 / 4 = 50 miles an hour on average. Divide your average speed by the miles per gallon to find how many gallons per hour of fuel you’re burning. In the example used here, 50 / 35 = 1.43 gallons per hour (rounded).
How much Diesel does a truck use per kilometer?
Large trucks that are used for commercial hauling, usually use the largest amount of fuel per kilometer. The vehicle that has the second-highest fuel-consumption rate is are smaller trucks that weigh between 3 to 8 tons. These vehicles use an average of 18 to 28 litres of diesel per 100 kilometers.
How much fuel does it take to travel 100km?
E.g. if fuel is $2, then 8.98l/100km means that it takes $17.96 of fuel to travel 100km, or around $0.18 per kilometre, not including your other costs like wear and tear. You will need the number of kilometres traveled between filling up your vehicle and the number of litres it took to fill the tank.
How to calculate the cost of petrol and diesel?
Most of us roughly know the miles per gallon (mpg) our cars do – yet we buy fuel in litres – it certainly makes for confusion! Here’s our petrol and diesel journey cost calculator – simply move the sliders to adjust distance travelled, add your estimated petrol/diesel consumption followed by what you’re paying for fuel to see the costs.
How much Diesel does a 4 wheel drive van use?
And 4-Wheel drive pick-up vans use around 13 to 16 litres of diesel per 100 kilometers. It’s no secret that diesel trucks use much less fuel than gas-powered engines use.