Admin Table of Contents
Can you replace lower ball joints yourself?
Recognizable for a knocking sound in the wheel well as you execute a turn, fixing old ball joints is an important part of keeping your vehicle road-safe. You can do it yourself for the price of the parts and the right approach.
How do you remove and replace lower ball joints?
Remove the knuckle and the strut assembly out so your press can access the ball joint. Remove the rubber boot by knocking it off with a hammer and screwdriver….Removing the ball joint.
| Set up ball joint separator tool. | Remove axle nut. |
|---|---|
| Fit upper adapter onto ball joint. | Fit lower adapter onto ball joint. |
Can you replace just the ball joint without replacing control arm?
Some ball joints can be replaced independently of the control arm, but not an easy DIY (need a press to get the ball joint out)! If this is going to be a DIY, change the entire control arm. Some ball joints can be replaced independently of the control arm, but not an easy DIY (need a press to get the ball joint out)!
Do you need an alignment after replacing ball joints?
alignment after ball joint is not necessary unless your previous alignment was done when ball joints were bad and loose. If your car is driving sloppy after ball joints replacement, check other suspension…
Can you drive with a bad ball joint?
Can I Drive With a Bad Ball Joint? You should not drive with a bad ball joint. Continuing to drive can cause damage to other vehicle components and if the joint fails completely you could lose control of the vehicle, leading to a crash and injuries.
Should I replace upper and lower ball joints at the same time?
Q: Should I Replace All Ball Joints at the Same Time? A: Plenty of mechanics will recommend that you replace both the upper and lower ball joints at the same time. They may also recommend checking related components at the same time, such as the stud hole in the steering knuckle.
Can I replace just one ball joint?
If you change the ball joints due to wear on one side of the vehicle, then the other side will likely go bad in a short time. I would recommend replacing both sides at the same time so only one alignment needs to be done and you have the peace of mind that your front ball joints will be good for a long time.
Do you need an alignment after replacing a ball joint?
How long can you drive on bad ball joints?
Generally speaking, you should expect to have to have your ball joints replaced between 70,000 to 150,000 miles of driving. Excessive play in the joint can cause additional wear, and if a ball joint fails, your car’s suspension could collapse and you could lose control of the vehicle.
Should you replace upper and lower ball joints at the same time?