Admin Table of Contents
How long should cabinet hardware screws be?
In general, the screw length(s) used should be 1/4″ longer than the thickness of your cabinet door or drawer front material. It is not uncommon for some drawers to be constructed with a 3/4″ thick front attached to a 3/4″ thick drawer box.
What size drill bit do you use for kitchen cabinet knobs?
3/16-inch
Drill Holes Most cabinet screws need a 3/16-inch diameter hole, so use a power drill with a 3/16-inch twist bit to create the screw holes. The cabinet pull manufacturer’s instructions will specify the required drill bit size as well.
What is the most common cabinet handle size?
For standard size cabinetry (dimensions of 12″ – 36″) the most common pull sizes are 3”, 4”, 96mm, and 128mm center to center (from one screw hole to another). Standard knob sizes are 1 1/4″ or 1 3/8″.
Do cabinet knobs come with screws?
Most cabinet knobs come with #8 machine screws, which require a 3/16 inch drill bit to drill the proper size opening. If the hole needs to be larger to accommodate a thicker cabinet material, simply increase the size of the drill bit by 1/16 of an inch.
What size drill bit should I use for a #8 screw?
1/8″
Drill Bit Sizes For Pre-Drilling For Screws Most Commonly Used Sizes In Bold
| Screw Size | Pilot hole size for hardwoods* | Pilot hole size for softwood** |
|---|---|---|
| #6 | 3/32″ | 5/64″ |
| #7 | 3/32″ | 5/64″ |
| #8 | 1/8″ | 3/32″ |
| #9 | 1/8″ | 3/32″ |
What size pulls for 36 inch cabinets?
Pulls 3-7 inches in length will sit the most comfortably on doors less than 24 inches tall. Cabinet doors 24-36 inches tall are best adorned with pulls 7-12 inches long, while cabinets taller than 36 inches such as pantries, built-in appliances and pullouts should be accompanied by pulls longer than 12 inches.
What size pulls for cabinets?
There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably. 5″ pulls are also an excellent choice.
How to choose knob size for cabinets?
Measure your cabinet. Average cabinet size is 30 to 42 inches tall. If your cabinet is within the average size, select a knob 1 to 1 1/2 inches in diameter . If your cabinet is smaller, choose a smaller knob. If it is larger, select a larger knob.
What size drill bit for cabinet hardware?
The majority of cabinet knobs are packaged with #8 machine screws, which measure 0.16 inch, or roughly 5/32 inch, in diameter. Use a 3/16-inch bit to drill the hole.
How can I tighten drawer knobs?
Open the drawer to access the screw holding the knob to the drawer face. Use a screwdriver to tighten the screw clockwise to secure the knob.
What size cabinet pulls?
For standard size cabinetry (dimensions of 12″ – 36″) the most common pull sizes are 3”, 4”, 96mm, and 128mm center to center (from one screw hole to another). Standard knob sizes are 1 1/4″ or 1 3/8″. For small specialized cabinetry (narrow drawers or dimensions under 12″)…