Table of Contents
- 1 Is dexron 3 the same as ATF 4?
- 2 What does transmission fluid DM mean?
- 3 Can you mix dexron and ATF 4?
- 4 What is ATF MV?
- 5 Can you still get dexron 3 transmission fluid?
- 6 What is the difference between Type F and dexron transmission fluid?
- 7 What is the replacement fluid for Dexron 3?
- 8 What kind of lubricant does a GM use?
Is dexron 3 the same as ATF 4?
Dexron IV was an upgraded version of Dexron III, which was used by GM only briefly. GM considers Dexron VI to be “backward compatible,” meaning GM recommends it for use in any vehicle that originally used any earlier version of Dexron and that it can be mixed with them.
What does transmission fluid DM mean?
Automatic Transmission Fluid
General Information. Automatic Transmission Fluid DM is a premium multifunctional power transmission fluid for all makes of cars, not just GM.
Can dexron 3 be used in all automatic transmissions?
ATF Dexron-III is recommended for use in automatic transmissions, where the manufacturer prescribes a GM Dexron IIE, Dexron III, or Ford Mercon fluid.
What is ATF 3 transmission fluid?
ATF III F is a mineral based automatic transmission fluid, especially developed for automatic transmissions built by GM, Ford and many other manufactures. The high viscosity index fluid offers resistance against corrosion and foam building. The product also has good anti oxidation and anti wear properties.
Can you mix dexron and ATF 4?
MaxLife® ATF, ATF +4 and DEXRON® VI are all synthetic transmission fluids. Is it OK to mix synthetic ATF with a conventional and/or synthetic blend ATF? Yes. Synthetic ATF and conventional fluids are 100 percent compatible with each other.
What is ATF MV?
Bel-Ray® ATF-MV Full Synthetic Multi-Vehicle ATF is formulated from premium synthetic base stocks and a state-of-the-art additive system to provide ultimate protection and peak performance in automatic transmissions found in passenger cars, flex-fuel vehicles, hybrids, light-trucks, and sport utility vehicles.
Is dexron 3 the same as ATF 3?
“ATF +3” is the same as “ATF TYPE III”? ATF+3 /ATF type 111 is a aftermarket fit all for the cry 5156 fluid. And should not be used where dexron 3 /mercon /dexron is required.
What is the difference between dexron III and dexron VI?
Dexron VI is a lot more stable at higher temperatures and lasts longer. It can also be used to top off dexron 3, however, you can’t use dexron 3 if you already have dexron 6 originally in your trans, or if it has been flushed with dexron 6.
Can you still get dexron 3 transmission fluid?
All Dexron-III (H) licenses expired permanently at the end of 2011, and GM now supports only Dexron-VI fluids for use in their older automatic transmissions. Aftermarket fluids asserted by their manufacturers to meet Dexron-III(H) and earlier standards continue to be sold under names such as Dex/Merc.
What is the difference between Type F and dexron transmission fluid?
What is the difference between DEXRON® III/MERCON® and type F transmission fluid? The Valvoline Type F transmission fluid is a high quality NON-friction modified fluid. DEXRON® III/MERCON includes friction modifiers in the fluid additive package.
When to use Petro Canada ATF D3M automatic transmission fluid?
Petro-Canada ATF D3M may be used in automatic transmissions where a fluid meeting the former DEXRON ®§ -III (H), -III (G), -II (E), -II or Ford MERCON ®† specification is recommended. This would include where the legacy General Motors specification 6297M and Ford specifications M2C166-H or M2C185-A are recommended.
What kind of fluid do you use for automatic transmission?
Automatic Transmission Fluid DM will continue to meet Allison C-4 specification. It also meets pre-2006 GM and Ford vehicle requirements. Automatic Transmission Fluid DM has a high viscosity index combined with excellent low temperature properties making this an excellent hydrostatic fluid as well as an automatic transmission fluid.
What is the replacement fluid for Dexron 3?
Direct Replacement. Dexron VI fully replaces Dexron III and prior evolutions of the Dexron fluids. GM manufactured the liquid for compatibility with transmissions requiring earlier versions of the fluid.
What kind of lubricant does a GM use?
GM improved upon the original lubricant and upgraded through multiple stages including Dexron II and Dexron III. Dexron III (H) and Dexron III/Saturn are upgrades to Dexron III fluids, and Dexron VI became the official replacement to Dexron III.