What does injection fault mean on a Renault Megane?

What does injection fault mean on a Renault Megane?

Leaks are internal and although leak-off is part of the system, when the leak-off gets too bad the fuel rail pressure drops. At first you get a warning “check injection” then the engine will stop as the fuel rail pressure sensor detects the drop in pressure and switches off the injection computer.

What does injector fault mean?

Ok.. the fault injection warning is basically and engine management warning message – this usually means your cars ecu has picked up on fault somewhere on the engine itself wether it be a sensor giving out or becoming faulty or wiring to these / a fuel injection system problem usually one of the injectors,intake system …

Why is my Renault Megane losing power?

2-Renault Megane 3 power loss: Injector problem So it is not giving your engine enough fuel, which can be the reason for a loss of power. In order to preserve your injection system we recommend that you check your diesel filter from time to time. This could damage your engine more quickly.

What does dCi stand for on a Renault Megane?

Direct common-rail injection
Direct common-rail injection. dCi is used by Nissan and Renault to describe the type of injection in a diesel engine.

What does check anti pollution system mean?

The Anti-pollution system warning light usually indicates the cars catalytic converter. is getting clogged. Your car need to get the catalytic converter hot in order to burn the rubbish out.

What causes a faulty fuel injector?

Sometimes fuel injectors can develop faults which impact on their performance or cause breakdowns. This is often due to them becoming clogged with debris, although some mechanical and electrical issues can also affect fuel injectors.

What make a car lose power while driving?

There are many reasons why your vehicle may be losing power, especially when accelerating. Some of these common causes are: Mechanical problems such as: Low compression, clogged fuel filter, dirty air filter, clogged Exhaust Manifold. Malfunction of actuators such as: Bad injectors, bad fuel pump, bad spark plugs.

Does Renault Megane 1.5 DCI have Turbo?

With 105 BHP, the turbocharged 1.5 Litre 8v Inline 4 diesel engine accelerates this Megane 1.5 dCi 106 to 62 mph in 11.1 seconds and on to a maximum speed of 115 mph. It comes with a 6 speed manual gearbox.

What does engine failure hazard mean?

Interpreting the display selected. « Engine failure hazard » Indicates an injection fault, the vehicle’s engine has overheated or there is a serious engine fault. « Power steering fault » Indicates a fault in the steering or a problem with the four-wheel drive.

What does check injection mean on Renault Captur?

The injection warning light looks very similar to the engine management light but indicates a fault in the fuel delivery system. Faults in the injection system usually result in a loss of power and reduces fuel efficiency.

Why does my Renault Megane have an injection fault?

So, the issue started driving along as normal down the motorway in fifth gear and when accellerating I got a beep, injection fault on the display and the STOP light appearing. This lasted a few seconds and then went away. No loss of power or smoke from the exhaust.

What’s the problem with the Megane 2 cylinder 2?

Renault Megane II cylinder 2 misfiring DF060. Injection fault error and running poorly. – YouTube

What is the fault code on a Renault Megane?

Plugged a computer in and got the below fault code. I consulted another mechanical friend (who breaks Renault’s) who said it is more than likely the fuel rail pressure sensor (the one that connected into the “spider” looking piece which splits the fuel to the 4 injectors.