Admin Table of Contents
- 1 Where is the diagnostic plug located?
- 2 Where is the diagnostic plug in a Mercedes?
- 3 Where is the diagnostic plug on a Renault Scenic?
- 4 What is a Mercedes me adapter?
- 5 Does OBD2 work on Mercedes?
- 6 Is there a fuse for the OBD port?
- 7 Where is the diagnostic connector on a CLK 230K?
- 8 What kind of connector do I need for Mercedes CLK 320?
- 9 Where to find DTC code on Mercedes SLK 230?
Where is the diagnostic plug located?
The OBD-II port is usually located under the dashboard, beneath the steering wheel column (1 – 3 in the diagram below).
Where is the diagnostic plug in a Mercedes?
Where to find the OBD2 port, when trying to connect a scanner to your Mercedes-Benz. The OBD II port is located under the dashboard, driver’s side. Look under the dash, over by the brake pedal.
Where is the OBD port on a 2000?
The OBD ii port in a 2000 Honda S2000 is on the driver side to the right of the steering column, slightly behind where the underside of the dash ends. If You reach up like You want to reach over the radio, You’ll find the OBD.
Where is the diagnostic plug on a Renault Scenic?
OBD connector location for Renault Scenic 3 (2009 – 2016)
- Between front seat, near cup holder.
- remove the cup holder, connector is behind.
- OBD Connector.
What is a Mercedes me adapter?
The Mercedes me Adapter links your vehicle very simply with your smartphone via Bluetooth®, allowing you to experience the dialogue with your vehicle in a totally new way.
What OBD protocol does Mercedes use?
Mercedes-Benz OBD-2 compatibility list
| Model | Engine | OBD-2 Protocol |
|---|---|---|
| Mercedes-Benz Class A | ISO 14230-4, ISO 9141-2 | |
| Mercedes-Benz CLK 230 | Kompressor, Gasoline (191 HP) | ISO 9141-2 |
| Mercedes-Benz CLK 270 | CDI, Diesel (168 HP) | ISO 9141-2 |
| Mercedes-Benz CLK 320 | Gasoline (215 HP) | ISO 14230-4 |
Does OBD2 work on Mercedes?
OBD1 and OBD2 compatibility. Specifically, you can use it on any Mercedes with chassis 201, 126, 124 and 107. You will, however, need to buy the 38-pin iCarsoft conversion adapter for an OBD1 Benz.
Is there a fuse for the OBD port?
Locating the OBD fuse That’s because the OBD fuse is commonly shared with the cigarette lighter or 12 v socket or other consumers. The OBD fuse may be listed on the fuse cover as OBD II, DLC, Accessory port, 12 v power point or cigarette lighter and will most likely be located inside the vehicle.
Are OBD and OBD2 ports the same?
As a result, in 1996 car manufacturers started to equip cars and trucks with an OBD-II port. Every system is mostly the same, but there are slight variations. These are known as protocols, and are specific to vehicle manufacturers.
Where is the diagnostic connector on a CLK 230K?
And in case anyone wants to know where the connector is on a RHD (UK) ’99 CLK 230K, open the bonnet and in the far right corner you will see a large cap about the size of a radiator cap (it fits in a similar fashion to a radiator cap too, 1/4 turn to unlock), with a smaller nut moulded in the centre.
What kind of connector do I need for Mercedes CLK 320?
You can normally undo this by hand to reveal the 38 pin connector. You will need a 38 – 16 pin convertor cable (ebay, about £5 inc p&p) MERCEDES BENZ 38 Pin To 16 Pin OBD2 OBD 2 Adapter Cable on eBay (end time 17-May-11 05:08:54 BST) .
Where is the OBD2 port on a Mercedes CLK?
OBD2 port Mercedes CLK Class – 210 (1997 – 2003) – Find your plug ! Where is my OBD2 port? All vehicles are equipped with an OBD port to which you can connect your klavkarr diagnostic case. Sometimes, the most difficult thing is to find this port!
Where to find DTC code on Mercedes SLK 230?
The dreaded Check Engine light (arrow) stays illuminated when the car’s computer registers a diagnostic trouble code (DTC). Disconnecting the battery doesn’t erase the code. The scan tool’s cable (or a Bluetooth module on wireless systems) plugs into the OBD-II diagnostic port (yellow arrow).